lipan may 22nd 23rd

BlaziNator


We need a map too.......

  
 
 

Attached Image(s)

Mark Snedecor
'02 TJ Sport

had a blast out there ill try to get pics up way later. thanks to everyone that helped un stick me, all 3 times.  thanks for my chair lol.     yup gave final determination that the driver hub is toast.. oh well i liked the mm hubs more anyway lol   i cant open my hood anymore, so i hit it with a hammer,  now i cant open my hood  and it has a new dent...

i didnt have any carb problems this trip!!!!!!!!!!!!!!

whats stock? 82k5 (rock-rod?) ,74cj5 ,58cj

sweet map,

whats stock? 82k5 (rock-rod?) ,74cj5 ,58cj

dean6824


  thanks for my chair lol.

 i cant open my hood anymore, so i hit it with a hammer,  now i cant open my hood  and it has a new dent...

your welcome...



lol, nice!!

Preston Donald

USA: '00 Noma ZR2 4.3L Tires, Wheels, Lift, Me-Built bumpers/sliders, 240,000+ miles
China: '96 2wd Cherokee Carbed 2.5L Wheels, Grill guard, Rear bumper guard, Spoiler

If it still works, it ain't broke

Where did this map come from!?!?! =O

1995 Blazer LT 4x4

Vids:
http://www.youtube.com/user/nathan61984

BlaziNator


Where did this map come from!?!?! =O

That was my GPS track (on the iPhone) from when we were out there last Sept.  I think that was the trip that Dean decided to play submarine commander.

Mark Snedecor
'02 TJ Sport

Very nice...I had a map on my garmin, but it was just lines and no way to transfer it. XD

1995 Blazer LT 4x4

Vids:
http://www.youtube.com/user/nathan61984

we could get full screen printable maps with that navigator app on our android phones, why didn't we think of that last weekend?!!!?!??!

-Steven Donald

1982 Subaru BrumVee

4" suspension lift on 30"ATs

4 wheel independant suspension = 17" of ground clearance....  yes, really!

well, i told yall my idler arm was dead... lol, but not even i knew how dead... lol

Driverside...



passenger side...



yes, those scratches are from the tie rod sleeve bolt... here are the gouges from the top of the TRE hitting the frame...



and half way through wheeling my ABS light came on... i figured a tree snaged the wire and tore it out or something... nope... it was the same bolt on the tie rod adjusting sleeve... pulled it in and cut it on the outside holding tab.




more broke stuff...

originally looked like this...



now:






exhaust pipe


yes, that is a large dent


lol








yes, it has foam inside it



looks like next on the docket are some plate skids... and SAS asap...

more pics:

http://s729.photobucket.c...ndonald/broke%20stuff/

Preston Donald

USA: '00 Noma ZR2 4.3L Tires, Wheels, Lift, Me-Built bumpers/sliders, 240,000+ miles
China: '96 2wd Cherokee Carbed 2.5L Wheels, Grill guard, Rear bumper guard, Spoiler

If it still works, it ain't broke

LOL, you killed it!!  the sliders were the WORST thing you ever put on your truck, lol....

-Steven Donald

1982 Subaru BrumVee

4" suspension lift on 30"ATs

4 wheel independant suspension = 17" of ground clearance....  yes, really!

wow, but i bet you had a good time!

Kayden

08 Silverado
07 Triumph Daytona
06 Seadoo Wake
05 Yamaha R6 <--- stolen =(
96 3500 Cummins
78 GMC K1500

i sure did!!! had a blast!!! =D

Preston Donald

USA: '00 Noma ZR2 4.3L Tires, Wheels, Lift, Me-Built bumpers/sliders, 240,000+ miles
China: '96 2wd Cherokee Carbed 2.5L Wheels, Grill guard, Rear bumper guard, Spoiler

If it still works, it ain't broke

Park Entrance - $$
Broken Parts - $$$$$
Pictures of Carnage - Priceless

Ryan Swift
- 84 Toyota Truck
- 85 4runner

i5sfe


Park Entrance - $$
Broken Parts - $$$$$
Pictures of Carnage - Priceless

 

1995 Blazer LT 4x4

Vids:
http://www.youtube.com/user/nathan61984

lol, well... right now the broken parts are free... =D the idler arm is the only thing and it's on Autozone's lifetime warrentee, so i could break them all day everyday... everything else that broke i really don't need to replace... without the skids my engine doesn't overheat when sitting in traffic now that i have no fan shroud... my fan got hungry and decided to eat it out on the trails... lol

Preston Donald

USA: '00 Noma ZR2 4.3L Tires, Wheels, Lift, Me-Built bumpers/sliders, 240,000+ miles
China: '96 2wd Cherokee Carbed 2.5L Wheels, Grill guard, Rear bumper guard, Spoiler

If it still works, it ain't broke

How are your engine mounts? Usually thats what makes fans eat shrouds!

CHRIS ARMOUR 
 The Minivan! 96 Tracker 4 door. 39.5's. D44's. 4.10's. Spooled front and rear. 6.5 t case.
One of the resident Canadian's! Eh! Hoser!

Yeah, I bet his are shot. I FINALLY got around to getting mine replaced today. Much better. Now I must find a spot to chain the engine. XD

1995 Blazer LT 4x4

Vids:
http://www.youtube.com/user/nathan61984

yeah, i havn't looked at the them but im sure they are gone... it first ate the top of the shroud and then was rubbing on the bottom of the tub from the torque lift/roll of the engine, and then it fell and ate the bottom of the shroud and it now vibrates the **** out of my truck at idle. lol

Preston Donald

USA: '00 Noma ZR2 4.3L Tires, Wheels, Lift, Me-Built bumpers/sliders, 240,000+ miles
China: '96 2wd Cherokee Carbed 2.5L Wheels, Grill guard, Rear bumper guard, Spoiler

If it still works, it ain't broke

Mine doesn't vibrate anymore =D

Change your mounts and chain your engine =P

1995 Blazer LT 4x4

Vids:
http://www.youtube.com/user/nathan61984

lol,

'the list' in order of importance
-SAS
-change injector system and intake manifold
-Motor Mounts
-fan shroud
-231 swap... possible doubler? =D
-fab up some real skid plates
-tires

=D

Preston Donald

USA: '00 Noma ZR2 4.3L Tires, Wheels, Lift, Me-Built bumpers/sliders, 240,000+ miles
China: '96 2wd Cherokee Carbed 2.5L Wheels, Grill guard, Rear bumper guard, Spoiler

If it still works, it ain't broke

blacknoma
 

it first ate the top of the shroud and then was rubbing on the bottom of the tub from the torque lift/roll of the engine, and then it fell and ate the bottom of the shroud and it now vibrates the **** out of my truck at idle. lol

ususally a sure sign your mounts are gone. replace them soon...it causes lot of stress oon other parts when the engine moves.
 
 

Kayden

08 Silverado
07 Triumph Daytona
06 Seadoo Wake
05 Yamaha R6 <--- stolen =(
96 3500 Cummins
78 GMC K1500

Preston,  I like your list of todos AND the order....  spot on!

-Steven Donald

1982 Subaru BrumVee

4" suspension lift on 30"ATs

4 wheel independant suspension = 17" of ground clearance....  yes, really!

lol, thanks...

Preston Donald

USA: '00 Noma ZR2 4.3L Tires, Wheels, Lift, Me-Built bumpers/sliders, 240,000+ miles
China: '96 2wd Cherokee Carbed 2.5L Wheels, Grill guard, Rear bumper guard, Spoiler

If it still works, it ain't broke

Great news! Upon further investigation, it turns out that my wife only broke her front drive shaft, not her transfer case...more to come. =D

1995 Blazer LT 4x4

Vids:
http://www.youtube.com/user/nathan61984

well thats a lot cheaper fix!!!

Kayden

08 Silverado
07 Triumph Daytona
06 Seadoo Wake
05 Yamaha R6 <--- stolen =(
96 3500 Cummins
78 GMC K1500

Yeah it is lol...$60 at autozone with a lifetime warranty. 

1995 Blazer LT 4x4

Vids:
http://www.youtube.com/user/nathan61984

Were not going to tell the autozone guy how the first one broke? Lifetime warranty muhahahaha

Yeah it's stock! so lets Wheel.

half my rigs on lifetime warranty

whats stock? 82k5 (rock-rod?) ,74cj5 ,58cj

hell yeah the whole front end of my truck is lifetime warranty through oreilly and autozone I've had to replace my left front unit bearing three times in two years and my trackbar four times. lmao the guy at oreilly told me if I had to warranty my track bar again they would just have to buy it back from me. LMAO if they only knew what I put there parts through. now im fixing to get my set of obx racing stainless steel headers on tuesday and they have a lifetime warranty as well so now I can get rid of my cracked hedman headers wooo hooooo.

• 01 Dodge Durango 5.9l stock FOR NOW!!!(Minnie)
• 95 Dodge Ram 1500 4x4, 5.9l, 6" lift, 37s (Thunder)
• 89 Jeep XJ 4x4, 4.0l, 5.5" lift, 35s (Mickey)
• 80 Chevy c10, 305 (Being restored)

Got the drive shaft replaced on Special K's Blazer:




Nummy =D

1995 Blazer LT 4x4

Vids:
http://www.youtube.com/user/nathan61984

nice.   u know some of you ifs guys might check out rcv performance shafts.. they seem pretty nifty 

whats stock? 82k5 (rock-rod?) ,74cj5 ,58cj