i5sfe
-
Total Posts
:
1446
-
Reward points
:
564
- Joined: 1/4/2009
- Location: Irving
-
Status: offline
|
ARB Bulkhead fitting
Saturday, February 04, 2012 12:04 PM
( permalink)
I missing the crush sleeve that goes on the copper line at the bulkhead fitting on the diff. I called 4WheelParts but they would have to order from California. Anyone know where I can get one closer to home? It's the circle sleeve at the left of this pic. It goes the 3/16 copper line. 
Ryan Swift - 84 Toyota Truck - 85 4runner
|
|
|
|
countrycowboy08
-
Total Posts
:
659
-
Reward points
:
471
- Joined: 3/11/2010
- Location: Azle, tx
-
Status: offline
|
Re:ARB Bulkhead fitting
Saturday, February 04, 2012 5:30 PM
( permalink)
go to fastenal you can get it there ace hardware may have something that will work too
- 01 Dodge Durango 5.9l stock FOR NOW!!!(Minnie)
- 95 Dodge Ram 1500 4x4, 5.9l, 6" lift, 37s (Thunder)
- 89 Jeep XJ 4x4, 4.0l, 5.5" lift, 35s (Mickey)
- 80 Chevy c10, 305 (Being restored)
|
|
|
|
i5sfe
-
Total Posts
:
1446
-
Reward points
:
564
- Joined: 1/4/2009
- Location: Irving
-
Status: offline
|
Re:ARB Bulkhead fitting
Saturday, February 04, 2012 7:28 PM
( permalink)
Did some further reading on this and I have the newer one with an o-ring on the copper line. I will see if I have anything close in my o-ring set however I'm question if it would last as long I hear the one's from ARB are Nitrile or Viton.  Some good tech info on ARB Lockers and Setup - http://www.pirate4x4.com/...4b_ARB_install-review/
Ryan Swift - 84 Toyota Truck - 85 4runner
|
|
|
|
Armour
-
Total Posts
:
792
-
Reward points
:
532
- Joined: 1/21/2008
- Location: Euless, Texas
-
Status: offline
|
Re:ARB Bulkhead fitting
Saturday, February 04, 2012 10:36 PM
( permalink)
I would think you would be fine!
CHRIS ARMOUR
The Minivan! 96 Tracker 4 door. 39.5's. D44's. 4.10's. Spooled front and rear. 6.5 t case.
One of the resident Canadian's! Eh! Hoser!
|
|
|
|
Boatime
-
Total Posts
:
277
-
Reward points
:
766
- Joined: 3/10/2007
- Location: Joshua
-
Status: offline
|
Re:ARB Bulkhead fitting
Sunday, February 05, 2012 6:28 AM
( permalink)
That is the style we are running and have never had any problems There is a newer style but it just changes the top
<message edited by Boatime on Sunday, February 05, 2012 6:30 AM>
Johnny Richmond '02 TJ V10 8.0 King coilovers 60 front 14 rear 5.38 ARB's Custom trilink front and rear 46" mickeys Stak 3 speed
|
|
|
|